Jump to content

Other Accessories

713 topics in this forum

  1. JuStiCe1er

    BIGTREETECH SKR MINI E3 V3.0 and BTT EXP-MOT V1.0 Module driver expansion module

    by JuStiCe1er
    • 1 reply
    • 379 views

    Hi all, Can I use a BIGTREETECH SKR MINI E3 V3.0 and BTT EXP-MOT V1.0 Module driver expansion module to use it on a Voron Trident for example ?

    BTT Tony
    Last reply by BTT Tony,
    • Like
  2. LCFJ60

    SKR 2 Rev B F429 Bltouch Servo Port

    by LCFJ60
    • 1 reply
    • 234 views

    Should there always be power (5vdc) on the pins? I'm trying to connect a bltouch and nothing happens, no lights or test probes. I've check the bltouch with 5vdc and it lights up red and probes twice. All the wires extensions test good.

    BTT Tony
    Last reply by BTT Tony,
  3. Christian

    BIQU2 setting in CURA

    by Christian
    • 1 reply
    • 621 views

    Hello everyone, I bought a BIQU2, since it brought the possibility of printing in two colors, but the problem is that nobody, not even the business that sold it to me, can tell me what the basic settings are in cure, to be able to test the printer, if anyone can pass me these parameters it would be great, the idea is to use it in PLA and PET-G for the moment, thank you very much from Argentina, best regards to all.

    BTT Tony
    Last reply by BTT Tony,
  4. f1wrx

    Can I upgrade to current version of Marlin 2.0.9.2

    by f1wrx
    • 5 replies
    • 677 views

    I'm using the BIGTREETECH E3 RRF V1.1 Wifi 32Bit Control Board Integrated TMC2209 with RRF IDEX V1.0. It is currently running the code downloaded from bigtreetech/BTT-E3-RRF on github. I can change the Configuration.h and Configuration_adv.h files. I don't use the wifi. Can I upgrade to the Marlin 2.0.9.2 or is there something that is custom in the BTT code.

    BTT Tony
    Last reply by BTT Tony,
  5. T Lul

    Cant compile Marlin for Bigtreetech Octopus Pro with the STM32F446ZET6 Processor

    by T Lul
    • 2 replies
    • 411 views

    I am trying to compile Marlin for the octopus Pro but i allways get this error: Compiling .pio\build\BIGTREE_OCTOPUS_V1_USB\src\src\HAL\STM32\watchdog.cpp.o Compiling .pio\build\BIGTREE_OCTOPUS_V1_USB\src\src\HAL\shared\Delay.cpp.o Compiling .pio\build\BIGTREE_OCTOPUS_V1_USB\src\src\HAL\shared\HAL_MinSerial.cpp.o Marlin\src\HAL\STM32\fast_pwm.cpp: In function 'void set_pwm_frequency(pin_t, int)': Marlin\src\HAL\STM32\fast_pwm.cpp:77:17: error: conflicting declaration 'const PinName pin_name' 77 | const PinName pin_name = digitalPinToPinName(pin); | ^~~~~~~~ Marlin\src\HAL\STM32\fast_pwm.cpp:74:11: note: previous declaration as…

    BTT Tony
    Last reply by BTT Tony,
  6. Callum Wilkes

    Printer bluescreened after software update.

    by Callum Wilkes
    • 2 replies
    • 554 views

    I installed a SKR mini e3 v2.0 motherboard into my ender 3 and ran it and the screen was fine but after attempting to update the software to a newer version of marlin it has blue screened.

    BTT Tony
    Last reply by BTT Tony,
  7. john johnson

    SKR 2 ISSUES

    by john johnson
    • 1 reply
    • 355 views

    I purchased the new SKR 2 board to replace my SKR 1.4 Turbo on my printer. After installing the board I used the version of Marlin that I downloaded from the BTT GitHub SKR 2 files. I compiled the firmware, tripled checked all of my connections, made sure the 12/24-USB jumper was set to the USB side, inserted my FAT formatted SD card with Marlin bin file on it into the board's SD slot, and plugged in my USB cable to my computer. Two red lights came on along with a green light under the SD slot but my computer never recognized the board and the firmware never flashed. My TFT35 came on but stated "no printer attached" and never changed. I followed some diagnostic informatio…

    BTT Tony
    Last reply by BTT Tony,
  8. Geo

    how to mount BIQU H2 extruder to cr-10s

    by Geo
    • 2 replies
    • 273 views

    is there a mount or a 3d file that can fit BIQU H2 extruder to Cr-10s?? please help.

    Geo
    Last reply by Geo,
    • Like
  9. Scott Oliver

    SKR Mini E3 V1.2 Firmware on ender 3 NOT taking firmware update

    by Scott Oliver
    • 1 reply
    • 268 views

    Hello all, I am trying to figure out what is going on with my ender. I am having all sorts of issues with the ABL settings. I am using the BLTouch. I changed #define GRID_MAX_POINTS_X from 5 to 3. I did this to see if the board was taking the updated firmware. It seems I was right and it is not loading the new firmware from the disc. The only thing I can find in relation to this is on another board they suggested resetting everything to load default values. I have tried that and it was a no go. If anyone knows how I can diagnose this please let me know. Thank you.

    BTT Tony
    Last reply by BTT Tony,
  10. Scott Oliver

    Bilinear ABL grid not probing whole bed

    by Scott Oliver
    • 1 reply
    • 276 views

    Hello I enabled bilinear leveling for the bltouch. It only probes half the bed for some reason. From the youtube videos it looks like it should probe the entire bed. Any info would be appreciated.

    BTT Tony
    Last reply by BTT Tony,
  11. Scott Oliver

    Bed Level Points Drive Extruder Into Bed

    by Scott Oliver
    • 1 reply
    • 244 views

    Hello I just downloaded the latest version of Marlin from the BTT website. I have an ender 3 with a SKR mini e3 v1.2 and tft 3.0, and a BLTouch. I have enabled the bltouch ini the firmware. I didnt make many changes in the firmware outside of enabling the bltouch. I am having all sorts of issues with the bed level functions now. The first issue is when I use the level points in the level menu. The printer goes to the point then it runs the extruder into the bed driving it down. It goes down so far the screws cant even keep it in place. How do I stop this?

    BTT Tony
    Last reply by BTT Tony,
  12. cowbite

    BTT E3 RRF 1.1 PLUS E3 RRF IDEX 1.0 FAN0 AND FAN1?

    by cowbite

    Hello, How do you enable fan0 and 1 on the idex board? I've plugged fans into them and tried to spin them up via the LCD but they don't do anything. I'm guessing there is a firmware setup necessary for this? Any help would be greatly appreciated as I have found nothing on the internet about this. Much appreciated.

    BTT Tony
    Last reply by BTT Tony,
  13. DoYouSkirtBro

    Display Feature Manual

    by DoYouSkirtBro
    • 1 reply
    • 294 views

    Hey, I just purchased the BIQU B1 printer as my first printer ever. As for now I'm able to make a simple print and use the printer easily. I believe that there are many more features in the machine that I could use. I wanted to ask: 1) Is there a manual for all the features/options in the BIQU B1 display? 2) Is there a manual of what each command does? If there isn't, I suggest that the company posts a full manual/discription video as it would greatly help the community and get more people to invest in these printers. So far having a good time printing and hope for more information that I could use in my future prints. #DoYouSkirtBro?

    BTT Tony
    Last reply by BTT Tony,
×
×
  • Create New...