Jump to content

  • A free model-sharing platform; copyrights belong to the respective creators.

Other

29 files

  1. 60ml 2.02fl oz paint bottle stacking holder

    By simon wilson

    Created on tinkercad easy print no need for support or brim

    1 download

       (0 reviews)

    Submitted

  2. Model Diesel Engine Starter Mk.4 i, tester wanted

    By Traffic Producer

    Model Diesel Engine Starter Mk.4.i

    Uses a clockwork type spring to wind up and start a Model Diesel Engine
    Note; if you offer advertising I am interested in this, please let me know; Although I am a very small budget.
    A tester is wanted, (UK please), to test with some real Model Diesel Engines and provide feedback.
     
    , not glow plug,  as I do not have the budget to buy one for testing. 
    Contact me on YouTube if you have a YouTube channel to video a real life test using at least one  Model Diesel Engine.
    This has mainly been made using a 3D printer.
    Only One available for testing:
    =================================
    Model Diesel Engine Starter Mk.4, A tester is wanted, (UK please), to test with some real Model Diesel Engines and provide feedback.
    I am looking for a YouTube Real Model Diesel Engine Starter tester, not glow plug,  as I do not have the budget to buy one for testing.
    https://www.printables.com/model/302259-model-diesel-engine-starter-mk4
    A video:- https://youtu.be/qL3cK1nrjxw

    10 downloads

       (0 reviews)

    Submitted

  3. Small parts bin with a label area for Harbor Freight storage tote.

    By Just in 3D

    Small parts bin with a label area for Harbor Freight organizer. Works with 20 Bin Medium Portable Parts Storage Case. 
    See storage case: https://www.harborfreight.com/tool-storage-organization/parts-storage/20-bin-medium-portable-parts-storage-case-93928.html
     
    p.s. I put supports under the model.

    4 downloads

       (0 reviews)

    Updated

  4. Bolt on QUAD - REVO nozzle holder for BIQU BX or other 2020, 2040, & 4040 frames

    By Just in 3D

    This is a REVO nozzle holder designed to mount to 2020, 2040, & 4040 extrusion with 2 - M4 x 10mm screws with t-nuts. These are loose fit designed for easy removal. There are also three versions. The first is a blank printed one with the intent to print a separate nameplate with either vertical or horizontal font. The next two are straight prints with the choice of vertical or horizontal font.  (designed by me)
    P.S. It Works best with regular PLA as the silk versions liked to crack.

    9 downloads

       (0 reviews)

    Submitted

  5. QUAD - REVO nozzle holder for BIQU BX or other 2020, 2040, & 4040 frames (snap-in)

    By Just in 3D

    This REVO nozzle holder is designed to mount to 2020, 2040, & 4040 extrusion snap-fit friction. These are loose fit designed for easy removal. I have tested these on Creality, BIQU, and Zyltech extrusions for fitment. All these models are designed for either the glue on printed badges or just labels from a label maker. (designed by me)

    3 downloads

       (0 reviews)

    Submitted

  6. Single - REVO nozzle holder for BIQU BX or other 2020, 2040, & 4040 frames (snap-in)

    By Just in 3D

    This REVO nozzle holder is designed to mount to 2020, 2040, & 4040 extrusion snap-fit friction. These are loose fit designed for easy removal. I have tested these on Creality, BIQU, and Zyltech extrusions for fitment. All these models are designed for either the glue on printed badges or just labels from a label maker. (designed by me)

    10 downloads

       (0 reviews)

    Submitted

  7. Stock duct extended 2mm for BIQU BX with the H2 V2 Revo Extruder

    By Just in 3D

    Stock duct extended 2mm for BIQU BX with the H2 V2 Revo Extruder. (Remixed from BIQU Github)

    2 downloads

       (0 reviews)

    Submitted

  8. Voron Kit

    By DelanaYoruba

    I am assembling a Voron printer for my father. He is a 3D printing enthusiast, and it has always been his dream to assemble a printer. I have already printed some accessories for it. It is a big project that requires a lot of time. There are 70 files in total. I have all the files needed, but I still need some time to perfect it.

    192 downloads

       (2 reviews)

    Updated

  9. Model Diesel Engine Starter Mk.4.i

    By Traffic Producer

    Model Diesel Engine Starter Mk.4.i

    Uses a clockwork type spring to wind up and start a Model Diesel Engine

    Note; if you offer advertising I am interested in this, please let me know; Although I am a very small budget.

    A tester is wanted, (UK please), to test with some real Model Diesel Engines and provide feedback.
    I am looking for a YouTube Real Model Diesel Engine Starter tester, not glow plug,  as I do not have the budget to buy one for testing. 

    Contact me on YouTube if you have a YouTube channel to video a real life test using at least one  Model Diesel Engine.
    This has mainly been made using a 3D printer.
    Only One available for testing:
    =================================
    Model Diesel Engine Starter Mk.4, A tester is wanted, (UK please), to test with some real Model Diesel Engines and provide feedback.
    I am looking for a YouTube Real Model Diesel Engine Starter tester, not glow plug,  as I do not have the budget to buy one for testing.
    https://www.printables.com/model/302259-model-diesel-engine-starter-mk4
    A video:-
    This said not all files can be uploaded too big
     
     

    9 downloads

       (0 reviews)

    Submitted

  10. A fix or prevention of the SD card slot of the BX from getting broken.

    By Just in 3D

    One of my BX printers had the SD slot break, so this is my fix. I put the prevention version on all five of my BXs. It fits all four of my ver.2 printers and the one Ver.3 I have. Based on that, i assume it will fit most BX printers, but your mileage may vary. 

    2 downloads

       (0 reviews)

    Submitted

  11. Octopus (Pro) Bracket

    By koehlr

    This is a bracket for the BigTreeTech Octopus (Pro) using two of my DIN rail mount.
    You need 8 M3x8 screws in total. 4 screws to attach this bracket on to the DIN rail mount and 4 screws to attach the board itself. You will also need 4 M3 heat inserts for this bracket.
    With this bracket you can mount your board horizontal or vertical to your DIN rail.

    2 downloads

       (0 reviews)

    Submitted

  12. Manta M4p Case for ender 3 Pro

    By rhawley88

    this is a case to install a Manta M4p in a ender 3 pro

    23 downloads

       (0 reviews)

    Updated

  13. 20mm Cable Clip

    By koehlr

    This is a universal cable clip for 20mm tubes.

    2 downloads

       (0 reviews)

    Submitted

  14. Rabbit

    By BIQU info

    FDM 3D printer slicing setting recommandation:
     (BIQU Hurakan, PLA filament)
    1. Layer height: 0.1
    2. Wall thickness: 1
    3. Infill density: 20%
    4. Printing temperature: 200℃
    5. Build plate temperature: 60℃
    6. Printing speed: 60mm/s
    7. Retraction distance: 7
    8. Retraction speed: 70mm/s
    9. No need to add support and build plate adhension

    1 download

       (0 reviews)

    Submitted

  15. Chinese NY 2023 Rabbit

    By BIQU info

    FDM 3D printer slicing setting recommandation:
     (BIQU Hurakan, PLA filament)
    1. Layer height: 0.1
    2. Wall thickness: 1
    3. Infill density: 20%
    4. Printing temperature: 200℃
    5. Build plate temperature: 60℃
    6. Printing speed: 60mm/s
    7. Retraction distance: 7
    8. Retraction speed: 70mm/s
    9. No need to add support and build plate adhension

    1 download

       (0 reviews)

    Submitted

  16. Christmas tree version2

    By BIQU info

    FDM 3D printer slicing setting recommandation:
     (BIQU Hurakan, PLA filament)
    1. Layer height: 0.1
    2. Wall thickness: 1
    3. Infill density: 20%
    4. Printing temperature: 200℃
    5. Build plate temperature: 60℃
    6. Print speed: 60mm/s
    7. Retraction distance: 7
    8. Retraction speed: 70mm/s
    9. No need support and build plate adhension

    1 download

       (0 reviews)

    Submitted

  17. Christmas tree

    By BIQU info

    FDM 3D printer slicing setting recommandation:
     (BIQU Hurakan, PLA filament)
    1. Layer height: 0.1
    2. Wall thickness: 1
    3. Infill density: 20%
    4. Printing temperature: 200℃
    5. Build plate temperature: 60℃
    6. Print speed: 60mm/s
    7. Retraction distance: 7
    8. Retraction speed: 70mm/s
    9. No need support and build plate adhension
     

    1 download

       (0 reviews)

    Submitted

  18. Christmas Ornament

    By Isabelle

    Here is my project for Christmas tree balls.
    Print in white PLA and take out the paint: the children will make you pretty decorations for the tree, gifts, etc... guaranteed rest time for a few minutes 🙂

    29 downloads

       (8 reviews)

    Submitted

  19. Snowman

    By BIQU info

    FDM 3D printer slicing setting recommandation:
     (BIQU Hurakan, PLA filament)
    1. Layer height: 0.1
    2. Wall thickness: 1
    3. Infill density: 20%
    4. Printing temperature: 190℃
    5. Build plate temperature: 60℃
    6. Print speed: 60mm/s
    7. Retraction distance: 7
    8. Retraction speed: 70mm/s
    9. Suggest add build plate adhension: brim
    10. No need support
    Please be careful when you remove the build plate adhension. 

    3 downloads

       (0 reviews)

    Submitted

  20. Christmas Star

    By Remi Nadeau

    Little Christmas decoration for your tree (mine is made with paint masking tape, I didn't have the space for a real tree). In any case, children love to decorate it.

    21 downloads

       (2 reviews)

    Submitted

  21. Christmas elk

    By BIQU info

    FDM 3D printer slicing setting recommandation:
     (BIQU Hurakan, PLA filament)
    1. Layer height: 0.2
    2. Wall thickness: 1
    3. Infill density: 20%
    4. Printing temperature: 190℃
    5. Build plate temperature: 60℃
    6. Print speed: 60mm/s
    7. Retraction distance: 7
    8. Retraction speed: 70mm/s
    9. Suggest add build plate adhension: brim
    10. No need support 
    Please be careful when you remove the build plate adhension.

    5 downloads

       (0 reviews)

    Submitted

  22. Santa Claus

    By BIQU info

    FDM 3D printer slicing setting recommandation:
     (BIQU Hurakan, PLA filament)
    1. Layer height: 0.2
    2. Wall thuickness: 1
    3. Infill density: 20%
    4. Printing temperature: 190℃
    5. Build plate temperature: 60℃
    6. Print speed: 60mm/s
    7. Retraction distance: 7
    8. Retraction speed: 70mm/s
    9. Suggest add build plate adhension: brim
    10. No need support 
    Please be careful when you remove the build plate adhension.

    2 downloads

       (0 reviews)

    Submitted

  23. Christmas tree

    By BIQU

    ZIP file. Please download and unzip, it contains three STL files.

    4 downloads

       (0 reviews)

    Updated

  24. BIQU Ghost3

    By BIQU

    RAR file. Please download and unzip, it contains a picture and an STL file

    4 downloads

       (0 reviews)

    Submitted

  25. BIQU Ghost2

    By BIQU

    RAR file. Please download and unzip, it contains a picture and an STL file

    14 downloads

       (1 review)

    Submitted

×
×
  • Create New...