.thumb.png.8a6b04bfa9af0ae76863d190ec8592cb.png)
About This File
FDM 3D printer slicing setting recommandation:
(BIQU Hurakan, PLA filament)
1. Layer height: 0.1
2. Wall thickness: 1
3. Infill density: 20%
4. Printing temperature: 200℃
5. Build plate temperature: 60℃
6. Print speed: 60mm/s
7. Retraction distance: 7
8. Retraction speed: 70mm/s
9. Suggest add support
Support structure: tree
Support placement: everywhere
Support Overhang Angle: 25°
Support Pattern: lines
Support Density: 15%
Support Infill Layer Thickness: 0.2mm
10. No need build plate adhension
Please be careful when you remove the support.
