Jump to content
  • Share superior 3D models, everyone is a creator.

3 files

  1. Minion Phone Stand

    FDM 3D printer slicing setting recommandation:
     (BIQU Hurakan, PLA filament)
    1. Layer height: 0.1
    2. Wall thickness: 1
    3. Infill density: 20%
    4. Printing temperature: 200℃
    5. Build plate temperature: 60℃
    6. Print speed: 60mm/s
    7. Retraction distance: 7
    8. Retraction speed: 70mm/s
    9. Suggest add support
    Support structure: tree
    Support placement: everywhere
    Support Overhang Angle: 25°
    Support Pattern: lines
    Support Density: 15%
    Support Infill Layer Thickness: 0.2mm
    10. No need build plate adhension
    Please be careful when you remove the support.

    2 downloads

       (1 review)

    Submitted

  2. Kangaroo Cell Phone Stand

    Recommendation:
    1. Printing temperature: 190℃
    2. Build plate temperature: 60℃
    3. Printing speed: 50mm/s
    4. Retraction distance: 7mm (Bowden extruder)
    5. Retraction speed: 70mm/s
    6. No need to build plate adhesion
    7. Support: you can add or not

    0 downloads

       (0 reviews)

    Submitted

  3. Paper Clips

    Recommendation:
    FDM 3D Printer: BIQU Hurakan
    Filament: PLA   1.75mm   190-240℃
    Slicer: Ultimaker Cura
    1. Printing temperature: 200℃
    2. Initial temperature: 190℃
    3. Final temperature: 185℃
    4. Build plate temperature: 60℃
    5. Flow: 100%
    6. Wall thickness: 1
    7. Infill density: 
    Flower: 20%
    Heart, Pumkin, Star: 40%
    8. Print speed: 50mm/s
    9. Infill speed: 50mm/s
    10. Enable Retraction
    Retraction distance: 2mm
    Retraction speed: 45mm/s
    11. Cooling fan speed: 100%
    12. Layer height: 0.1
    13. No need Support and Build plate adhesion

    1 download

       (0 reviews)

    Submitted


×
×
  • Create New...