Jump to content

  • A free model-sharing platform; copyrights belong to the respective creators.

3D printer and upgrade accessories

8 files

  1. $45 All-in-one klipper and klipperscreen upgrade solution for most printers

    By Jack

    Description
     PDF
    This is an all-in-one klipper and klippercreen package that uses a BTT pi v1.2 as a budget alternative to a raspberry pi and TFT35 SPI as a touchscreen (The TFT35 SPI actually isn't very good at all: the touch function can sometimes take 3 tries for it to sense).
    BOM:
    btt pi + TFT35 SPI https://vi.aliexpress.com/item/1005006340636804.html?spm=a2g0o.order_list.order_list_main.10.1bd21802eyKS77&gatewayAdapt=glo2vnm Or you could not use the touchscreen: https://vi.aliexpress.com/item/1005006042755049.html?spm=a2g0o.productlist.main.3.612d5b5ek1Jh1Y&algo_pvid=3869be12-20f7-4f9e-a40f-ec34b46b529d&algo_exp_id=3869be12-20f7-4f9e-a40f-ec34b46b529d-1&pdp_npi=4%40dis%21AUD%21142.34%2142.70%21%21%21679.10%21203.73%21%402101effb17176457002707903ee229%2112000035456316898%21sea%21AU%213008025678%21&curPageLogUid=eOzMEQnbcGY4&utparam-url=scene%3Asearch%7Cquery_from%3A M2x10 Self tapping screws (to mount the pi) https://vi.aliexpress.com/item/1005005730916402.html?spm=a2g0o.productlist.main.11.2cda5482lqzjPZ&algo_pvid=a46a3bc8-9fb8-4a97-bf7e-a88994e099e7&algo_exp_id=a46a3bc8-9fb8-4a97-bf7e-a88994e099e7-5&pdp_npi=4%40dis%21AUD%212.11%211.97%21%21%211.39%211.30%21%402101fb1617176466264771727ec748%2112000034145006285%21sea%21AU%213008025678%21&curPageLogUid=9Cdj0f9CJZcz&utparam-url=scene%3Asearch%7Cquery_from%3A Something to power the pi: I used some cables that I ran to the printer's PSU and powered it via the screw terminals but you could also power it with USB. Optional: 4010 or 3010 (4010 is better) axial fan (highly recommended: without it the pi ran at ~49-50°C, with the fan it runs at ~35°C) https://vi.aliexpress.com/item/1005003878405207.html?spm=a2g0o.order_list.order_list_main.16.1bd21802eyKS77&gatewayAdapt=glo2vnm  (use the 24v dual ball option if your printer has a 24v PSU, or you could use the 5v option and power it from the pi, but I haven't tested that) If using TFT35 SPI or a fan: M3x12 BHCS x10 https://vi.aliexpress.com/item/1049664013.html?spm=a2g0o.productlist.main.11.72bb4e5cmxhN0g&algo_pvid=f89bb02a-4395-44d8-b4a5-9f44f77f8989&algo_exp_id=f89bb02a-4395-44d8-b4a5-9f44f77f8989-5&pdp_npi=4%40dis%21AUD%213.53%213.53%21%21%2116.85%2116.85%21%402101fb1017176462944315852ef26c%2112000037963538068%21sea%21AU%213008025678%21&curPageLogUid=nBh8griuPNne&utparam-url=scene%3Asearch%7Cquery_from%3A some glue (I used a hot glue gun)  
    What files to print
    case for the btt pi: "Case_main_part.stl" to mount the pi case onto the aluminium extrusion “T-nut_extrusion_mount_x4” (I printed 4 and attached the pi case on the side of a 4040 extrusion) if you are not using the TFT 35 SPI:"Case_top" and choose an option that matches what fan you are using (4010 fan, 3010 fan or no fan) if you are using the TFT35 SPI: “Case_to_with_screen” and choose your fan option If you are using the TFT35 SPI: “TFT35S SPI mount v2” Tips:
     
    it might also be a good idea to set up a webcam: https://www.amazon.com.au/dp/B07MK2LB66?psc=1&ref=ppx_yo2ov_dt_b_product_details and use octoeverywhere for AI print failure detection and remote monitoring (it works really well) KIAUH is as good as everyone says Orcaslicer is also as good as everyone makes you think using the voron docs helps heaps (just remember to alter it slightly for whatever print that you are using 1GB of RAM is enough for 1 printer with 1 webcam running at ~10fps If you want to print faster it might be a good idea to upgrade your part cooling

    0 downloads

       (0 reviews)

    Submitted

  2. Bigtreetech, BTT HBB keyboard case.

    By Yellowicz

    I designed a Bigtreetech HBB keyboard case for a competition. Apparently someone liked the case because it received an award. The turtle looks like a hybrid between a ball-swallowing crocodile and a terrified frog, but I couldn't make it any better. So I'm sharing this nasty thing.

    0 downloads

       (0 reviews)

    Submitted

  3. Manta M8P Top & Under mount Remix

    By jpapavas

    Remix mount for Manta M8P (under and top) with 2x 4010Fan & 1x 5015Fan.
    Cooling for MCU, Host & stepper drivers.
    Ver. 1.0.2 Fixed Top Mount bolt foot 

    8 downloads

       (0 reviews)

    Submitted

  4. Biqu b1se plus H2 extruder mount system

    By Bribri3d

    This mount reuses the original mounting plate and relocates the bus board to where the extruder stepper mounts originally. the nozzle retains the stock x,y position and the probe mounts are offset by 47mm to left of nozzle and in line. I have included brackets for both microprobe and bltouch probes. I have also included step files to allow remixing. this mount works with v1 as well as v2, I used cf nylon for mount base and probe bracket and pla for other parts.  

    12 downloads

       (0 reviews)

    Submitted

  5. 2020 rail tray fits ender 5 and 3 and has linier rail slot upgrade

    By simon wilson

    Created on tinkercad easy print no need for support but I used brim to print on side so no supports

    1 download

       (0 reviews)

    Submitted

  6. Voron 2.4 BTT HDMI5 Screen Mount with Skirts for all sizes

    By Shriganesh Borse

    This is BTT HDMI5 Screen Mount with Skirts for Voron 2.4 for all sizes

     

    61 downloads

       (0 reviews)

    Updated

  7. LED remote holder

    By Just in 3D

    This is a pretty basic LED remote holder. It works with most brands I have I'm sure there are some that won't without scaling it. Just VHB tape it or do velcro like I did. 

    1 download

       (0 reviews)

    Submitted

  8. 25mm spacer for BIQU BX

    By Just in 3D

    This is a 25mm spacer for moving the BIQU BX screen forward for MAD fan ducting.  It takes M6 30mm or longer screws

    1 download

       (0 reviews)

    Submitted

×
×
  • Create New...