Jump to content

SKR MINI E3 V2 + TFT35 touchscreen upgrade. Z axis prints short.


PNWscitech

Recommended Posts

Hi, I bought the SKR MINI E3 V2.0 control board with the TFT35 touch screen. I installed it to upgrade my TRONXY XY-2 printer. My prints are coming out fine on the x and y axis, but are short on the z axis. Most of the time they are about half height, sometimes they are 3/4 height. I've checked the manual z move and it moves the correct amount on manual, but not while printing. I have upgraded the firmware, tried different slicers, turned off the heated bed to reduce PSU load and nothing helps. What could cause the Z axis to be short only when printing?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...