SKR v1.2 pro wifi module

[Bowie70]

Please ad a install guide how to install the firmware for the wifi module

[BTT Tony]

Hi, you need to connect the ESP01wifi module first, then install the manual to set it up. The wifi module comes with its own firmware, you don't need to update the module's firmware. https://github.com/bigtreetech/BTT-WRITER-V1.0/blob/master/BTT ESP-01S basic guide-20200225.pdf

[Bowie70]

Please rewrite the manual and dont mix two different setups. Because the manual does not explain anything, it makes it even more complex.

Oke lets do this step by step

1 plug in the ESP01 in the board

2 which files do I have to download and flash on the the motherboard?

 

[BTT Tony]

After the motherboard is connected to the wifi module, in the firmware of the motherboard, modify a serial port to 3. Update the firmware on the motherboard. Then it will display the ip address in Marlin mode, and then connect to the computer according to the instructions.

 

 

[Bowie70]

Nope it is not working

Oke I did connect the wifi module on to the motherboard SKR 1.2pro

Then I changed the marlin firmware en set a serial port to 3 amd flashed the firmware

But nothing is working

 

Edited January 25, 2022 by Bowie70