Biqu B1 Plus Cura Profile

[Solo]

I'm looking at getting a BIQU B1 Plus but I don't see the Printer on Cura. Is there a way to add it or is there a printer profile that matches?

[BIQU info]

Hi, you could add a new printer, please follow the steps. 

1. Add a new printer button

 

2. Click "Add a networked printer"

 

3. Then choose Custom FFF printer, name it as B1 SE PLUS

 

4. Set the right parameters, especially the "building area" (310*310*340) and "material diameter" (1.75mm). And tick the "heated bed". Then you could change the build plate temperature, otherwise it is locked by 60℃.

 

5. In the end, the setting is over. You could slice the model in Cura under your B1 SE PLUS setting. If you have any problem, please feel free to contact us. Looking forward to your art works!

 

[woahcheeto]

On 11/10/2022 at 1:57 AM, BIQU info said:

Hi, you could add a new printer, please follow the steps. 

1. Add a new printer button

 

2. Click "Add a networked printer"

 

3. Then choose Custom FFF printer, name it as B1 SE PLUS

 

4. Set the right parameters, especially the "building area" (310*310*340) and "material diameter" (1.75mm). And tick the "heated bed". Then you could change the build plate temperature, otherwise it is locked by 60℃.

 

5. In the end, the setting is over. You could slice the model in Cura under your B1 SE PLUS setting. If you have any problem, please feel free to contact us. Looking forward to your art works!

 

is there start and end gcode i can use?