Jump to content

ender 3 pro, skr mini e3 V3 temp drops after starting print


Recommended Posts

ok so i have a standard e3p with the skr mini e3 V3 installed, everything is wired up properly, i actually run 3 of these printers all with the same board, same setup, same everything, except this one particular printer, once it gets up to print and begins the job, the hot end temp drops till it just reboots itself.

i can bring it up to temp and let it sit there and get no problem, it seems its only when it begins the print job it actually starts to loose temperature.

it was working perfectly fine before replacing the board and i have had successful prints so this is a new development.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...