Jump to content

SKR 3 EZ and Tronxy X5SA-Pro Z probe with Klipper


Recommended Posts

I have a Tronxy X5SA-Pro that I am upgrading with an SKR 3 EZ board and I'm having some trouble getting the Z probe to function. I'm using the latest release of Klipper, and most everything works except for the Z probe. I have the relevant portions of my config below. Any thoughts?

[stepper_z]
step_pin: PE2
dir_pin: !PE3
enable_pin: !PE0
microsteps: 32
rotation_distance: 8
endstop_pin: probe: z_virtual_endstop
position_max: 200
position_min: -2

[safe_z_home]
home_xy_position: 165, 165
speed: 50
z_hop: 10
z_hop_speed: 5


[probe]
x_offset: -35
y_offset: 0
pin: !PC0
speed: 20
z_offset: 6.220
deactivate_on_each_sample: False

 

Link to comment
Share on other sites

  • Administrators
On 6/18/2022 at 10:30 PM, Patrick McPhee said:

I have a Tronxy X5SA-Pro that I am upgrading with an SKR 3 EZ board and I'm having some trouble getting the Z probe to function. I'm using the latest release of Klipper, and most everything works except for the Z probe. I have the relevant portions of my config below. Any thoughts?

[stepper_z]
step_pin: PE2
dir_pin: !PE3
enable_pin: !PE0
microsteps: 32
rotation_distance: 8
endstop_pin: probe: z_virtual_endstop
position_max: 200
position_min: -2

[safe_z_home]
home_xy_position: 165, 165
speed: 50
z_hop: 10
z_hop_speed: 5


[probe]
x_offset: -35
y_offset: 0
pin: !PC0
speed: 20
z_offset: 6.220
deactivate_on_each_sample: False

 

If you have any product issues, please submit a request and we will arrange for an engineer to communicate with you as soon as possible.

Click on the top navigation "Submit a request" or Please click
https://support.biqu3d.com/hc/en-us/requests/new

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...