Jump to content

Bigtreetech TFT 2.4 V2.0 display upgrade problem


Recommended Posts

Hello everyone,

I bought your tft screen Bigtreetech TFT 2.4 V1.1 display for a project i'm making.
Now for that project I had to flash the tft screen to the latest firmware version of you on github.
Did everything as described and this went without any problems.


However, after flashing and restarting, I found out that I had not taken the latest version Vx.x.27 but the previous version Vx.x.26 , stupid me.
So with good intentions downloaded the latest firmware and put it on sd card and let it flash again.
However now the screen keeps hanging when he has to read the config.ini file and then doesn't go any further with the result that it starts up with the text Marlin and if I want to go to the touch part , by long pressing the screen it stays hang with your logo.

I haven't done anything different than the same with the previous firmware where it worked fine. 

So I thought, go back to Vx.x.26 that went well and now it doesn't work anymore, with the same result.


I am now so disappointed in myself and sad about this problem.
Can I now throw that screen in the trash or can this be fixed?

 

Link to comment
Share on other sites

19 hours ago, Pascal said:

Hello everyone,

I bought your tft screen Bigtreetech TFT 2.4 V1.1 display for a project i'm making.
Now for that project I had to flash the tft screen to the latest firmware version of you on github.
Did everything as described and this went without any problems.


However, after flashing and restarting, I found out that I had not taken the latest version Vx.x.27 but the previous version Vx.x.26 , stupid me.
So with good intentions downloaded the latest firmware and put it on sd card and let it flash again.
However now the screen keeps hanging when he has to read the config.ini file and then doesn't go any further with the result that it starts up with the text Marlin and if I want to go to the touch part , by long pressing the screen it stays hang with your logo.

I haven't done anything different than the same with the previous firmware where it worked fine. 

So I thought, go back to Vx.x.26 that went well and now it doesn't work anymore, with the same result.


I am now so disappointed in myself and sad about this problem.
Can I now throw that screen in the trash or can this be fixed?

 

If you have any product issues, please submit a request and we will arrange for an engineer to communicate with you as soon as possible.

Click on the top navigation "Submit a request" or Please click
https://support.biqu3d.com/hc/en-us/requests/new

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...