flash SW onto Octpus Pro V1.0 with vscode/platformio using USB-C cable

[Majestix]

Hi,

I want to flash my Octopus Pro V1.0 board using vscode/platformio directly via the USB-C connector. Do want to use the sd-card flash since this is annoying if you need to make to many changes.

 

My Windows10 system does recognoice the Octopus Pro when connected via USB-cable and shows up as USB device on COM3

If I try to flash (e.g. Marlin) on the board, vscode does not recognoce the board and ends with an connection error (board does not answer...)

Is there somthing I need to do in order to be able to flash SW directly to the board using the USB-C connector?

Or is this not at all supported by this board?

Hope someone can help me

Best regrads

Majestix

[BIQU info]

On 5/24/2022 at 2:00 PM, Majestix said:

Hi,

I want to flash my Octopus Pro V1.0 board using vscode/platformio directly via the USB-C connector. Do want to use the sd-card flash since this is annoying if you need to make to many changes.

 

My Windows10 system does recognoice the Octopus Pro when connected via USB-cable and shows up as USB device on COM3

If I try to flash (e.g. Marlin) on the board, vscode does not recognoce the board and ends with an connection error (board does not answer...)

Is there somthing I need to do in order to be able to flash SW directly to the board using the USB-C connector?

Or is this not at all supported by this board?

Hope someone can help me

Best regrads

Majestix

If you have any product issues, please submit a request and we will arrange for an engineer to communicate with you as soon as possible.

Click on the top navigation "Submit a request" or Please click
https://support.biqu3d.com/hc/en-us/requests/new