Jump to content

SKR Pro v1.2 3.3v LED not lighting up


Andy

Recommended Posts

Hi all,

 

I moved my printer today and ever since the 3.3v LED no longer lights up when powering the board from USB or from a 12V PSU (after moving the pin). I checked the fuses with a multimeter and they all seem fine. Any idea what else I could try?

 

Thanks!

Link to comment
Share on other sites

  • Administrators
On 5/18/2022 at 1:27 AM, Andy said:

Hi all,

 

I moved my printer today and ever since the 3.3v LED no longer lights up when powering the board from USB or from a 12V PSU (after moving the pin). I checked the fuses with a multimeter and they all seem fine. Any idea what else I could try?

 

Thanks!

If you have any product issues, please submit a request and we will arrange for an engineer to communicate with you as soon as possible.

Click on the top navigation "Submit a request" or Please click
https://support.biqu3d.com/hc/en-us/requests/new

Link to comment
Share on other sites

  • 11 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...