KVDIAG3D Posted May 3, 2022 Share Posted May 3, 2022 I am having issues printing. I made the bracket, mounted my H2, coded the ratio for the filament but it only prints perfect for the 2passes on the left, when it starts to print, the filament doesn't stick to the bed, doesn't extrude properly and when it retracks, it feels as it retracks too much then not extrudes enough. Temps are 60 for the bed and 200 for the hotend. Help please Quote Link to comment Share on other sites More sharing options...
BTT Tony Posted May 4, 2022 Share Posted May 4, 2022 Hi , Thanks for your information. Does the H2 work fine before you coded the ratio for the filament? Quote Link to comment Share on other sites More sharing options...
KVDIAG3D Posted May 5, 2022 Author Share Posted May 5, 2022 Thanks for the response. No, the Estep ratio was too far off so it didn't work at all. Quote Link to comment Share on other sites More sharing options...
Administrators BIQU info Posted May 5, 2022 Administrators Share Posted May 5, 2022 If you have any product issues, please submit a request and we will arrange for an engineer to communicate with you as soon as possible. Click on the top navigation "Submit a request" or Please clickhttps://support.biqu3d.com/hc/en-us/requests/new Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.