Phillip

[phillipgcollis]

Hi

 

i have just received the bigtreetech Tango V 1.0 mother board

 

Its is replace a bad board on a brand new Reprap 3 in 1 out printer HE3 d model  

 

Ok most of the wiring is clear but it came with a plastic bag with what i understand as called jumper caps x 5 of them..

Can anyone enlighten me of what they do and where they go on the board as several pin options are there...Cheers Phillip

[phillipgcollis]

2 hours ago, phillipgcollis said:

Hi

 

i have just received the bigtreetech Tango V 1.0 mother board

 

Its is replace a bad board on a brand new Reprap 3 in 1 out printer HE3 d model  

 

Ok most of the wiring is clear but it came with a plastic bag with what i understand as called jumper caps x 5 of them..

Can anyone enlighten me of what they do and where they go on the board as several pin options are there...Cheers Phillip

 

[phillipgcollis]

[phillipgcollis]

Hi

 

ok new problem has arisen 

First photo is original of bad board and shows for at least..

 

last photo is new as Tango or As shown as sketch that came with the board...and has no entry plugs for fan so kindly advise what happens here do i cut off the plugs and use which  of  the blue bottom bar with screws Phillip