Jump to content

Problem with filament extrusion

Recommended Posts

The problem boils down to the difficulty of extrusion by the printer.
In the first 200 mm of extrusion the filament comes out particularly well, but after that there is a huge force on the extruder making the extrusion motor unable to push the filament.
To try to remedy the problem, I have already tried to change and adjust the extrusion motor, I bought new nozzles and I set the temperature at maximum extrusion and even so, the filament continues to do the same behavior.
I've had the printer for a year and it has rarely given me any difficulties, now this problem has arisen which I can't solve, with the printer stopped for two months.
Do you have any suggestions as to what might be preventing the filament from extruding.



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...