Replacing CR-10 motherboard with the SKR Mini E3 v3.

[Ienni]

I've been trying to replace the cr-10 motherboard with the SKR Mini E3 V3, but the connectors are not the same.

Now i've been able to connect some of the cables to the SKR but it's not perfect.

Is there a tutorial video somewhere or steps on how to replace the motherboard?

[BTT Tony]

 

Hi,

Thanks for your information.

We did not have the video for skr mini e3 v3 with the cr 10.

I get a similar video to you which is about  skr mini e3 v1.2 with the cr 10.

You can refert to it to operate. 

And here is the manual for the skr mini e3 v3 

https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/master/hardware/BTT SKR MINI E3 V3.0/Hardware/BTT SKR MINI E3 V3.0 user manual.pdf

 

Edited May 23, 2022 by BTT Tony

[crane02]

hi I was just wondering if you did the motherboard swap. I want to do the same thing with my cr-10. if so did you have to do something special 

[ArmaliteGuy]

I have the same issue. My v3 has 4 pin plugs for x motor, 2-z motor, e nmotor, and e motor. I think credulity combined the stops in the same plugs. I'm not sure which wire each is nor where to get the plugs for 2 pin.

I have pics on my tablet but can't figure how to upload.