Jump to content

skr mini e3 v3 z homing fails and nozzle crash with bed Help me please!


Juanma2k

Recommended Posts

Hi all!

I install a skr mini e3 v3 in my Creality CR-10s replacing the old creality board. I have in my printer a 3d touch sensor (bltouch clone).

I configure a compile the skr mini e3 v3 TH3 unified firmware for CR-10s printer here

On z-homing or auto home, it seems that the probe does not detect when it touches the bed and the z axis advances inexorably until the nozzle crash with the bed and does not stop until I unplug the power supply.

Steps to reproduce:

  1. Replaced the old original board with the new SKR mini E3 V3.0
  2. Installed the 3d Touch
  3. Removed the original Z-EndStop switch.
  4. Installed the unified firmware
  5. Press Auto-Home

3d touch connected correctly to 5 pin connector.

I have also tried to connect the black and white cables in the two possible positions to the z-endstop port with the same result.

I'm desperate, please help me.

 

Link to comment
Share on other sites

  • Administrators
2 hours ago, Juanma2k said:

Hi all!

I install a skr mini e3 v3 in my Creality CR-10s replacing the old creality board. I have in my printer a 3d touch sensor (bltouch clone).

I configure a compile the skr mini e3 v3 TH3 unified firmware for CR-10s printer here

On z-homing or auto home, it seems that the probe does not detect when it touches the bed and the z axis advances inexorably until the nozzle crash with the bed and does not stop until I unplug the power supply.

Steps to reproduce:

  1. Replaced the old original board with the new SKR mini E3 V3.0
  2. Installed the 3d Touch
  3. Removed the original Z-EndStop switch.
  4. Installed the unified firmware
  5. Press Auto-Home

3d touch connected correctly to 5 pin connector.

I have also tried to connect the black and white cables in the two possible positions to the z-endstop port with the same result.

I'm desperate, please help me.

 

If you have any product issues, please submit a request and we will arrange for an engineer to communicate with you as soon as possible.

Click on the top navigation "Submit a request" or Please click
https://support.biqu3d.com/hc/en-us/requests/new

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...